Project: MartysRV14A   -  
            Listing of Entries
    (Please mouse-over any icon to get a description of that function).



Categories
  
Builder Name:Martin Guinn   -  
Project:   Vans - RV-14A   -   VIEW REPORTS
Total Hours:1990.5
Total Flight Time:36.1
Total Expense:N/A
Start/Last Date:Aug 30, 2019 - Dec 06, 2021
Engine:Lycoming YIO-390-A3B6 Thunderbolt
Propeller:Hartzell
Panel:G3X Touch/GTN 650xi, SteinAir
 
Friendly URL: https://eaabuilderslog.org?s=MartysRV14A

Home or Last Project Picture

Jan 07, 2022     Flight #7 Pre-Flight - (4 hours) Category: Flight
Pre-Flight Prep:
- check angle of each flap relative to canopy longeron and neutral aileron. Make adjustments if possible to add differential lift in ccw direction
- adjust stall warning vane down slightly so that it actuates at a lower airspeed.
- read about the TOGA button and practice using it in the pattern

Trim Issue:
G3expert emailed that the AP roll trim behavior is a backward roll trim servo direction, which was in fact the case. The trim was be directed by the servo to move in the opposite direction. This should solve the problem.

Co-Pilot Stick
Installed the co-pilot stick.

Gust Lock
Installed the Anti-Splat gust lock.
 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.